Home - Guizhou Reeke Rock Tools Co.,Ltd

TOPHAMMER TOOLS (30)

DOWN THE HOLE TOOLS (11)

TRICONE TOOLS (4)

FEATURES PRODUCTS

11°H22 32/34/36/38/40mm taper button bit

SMALL HOLE DRILLING

11° taper drill bit, made of high-quality alloy and carbide buttons, is suitable for small hole blasting. It has 4/5/6/7/8 and buttons, diameter: 32-41mm, length: 50- 5mm, available in H22 specifications, widely used in Latin American, south American, south Africa,and other countries. It is the most widely used drill bit in the world and is used for underground drifting,mining, quarrying, infrastructure construction,using for the hard rock tools , etc. For details, please see below

ENQUIRY!

11°H22*108mm taper rod 400-6000mm

TAPERED DRILL RODS

The 11° taper drill hole is made of carburized alloy steel for extremely strong ductility and hardness. The head is connected to the taper bit, and the tail is connected to the rock drill, jackhammer, etc., and uses rotation and reciprocating motion to transfer energy. Diameter：H22 Length: 400-6000mm, Shank:89/108/159mm top diameter:17.8mm degree:11

ENQUIRY!

12 1/4″IADC 642/ 645/542/545

TRICONE BIT

Tricone bits are the most widely used drill bits and are suitable for a variety of formations from soft to hard. The tricone bit has low torque when breaking rock, rotates smoothly, and causes little harm to drilling tools and ground equipment: the working edge is longer than that of a scraper bit, which reduces wear and extends the service life. IADC Code:645 Bearing Type:Roller-Ball-Roller-Thrust Button/Sealed Bearing circulation Type:Jet Air Cutting Structure:-lnner and Nose Rows:Conical -Gage Rows:Ovoid Pin Connection:6 5/8"API Bit Diameter:311mm(12 1/4") Product Weight:100KGS

ENQUIRY!

12°H22 32/34/36/38/40mm taper button bit

SMALL HOLE DRILLING

12° taper drill bit, made of high-quality alloy and carbide buttons, is suitable for small hole blasting. It has 4/5/6/7/8 and buttons, diameter: 32-41mm, length: 50- 5mm, available in H22 specifications, widely used in Latin American, south American, south Africa,and other countries. It is the most widely used drill bit in the world and is used for underground drifting,mining, quarrying, infrastructure construction,using for the hard rock tools , etc. For details, please see below

ENQUIRY!

12°H22/H25*108mm taper rod 400-6000mm

TAPERED DRILL RODS

The 12° taper drill hole is made of carburized alloy steel for extremely strong ductility and hardness. The head is connected to the taper bit, and the tail is connected to the rock drill, jackhammer, etc., and uses rotation and reciprocating motion to transfer energy. Diameter：H22/G25 Length: 400-6000mm, Shank:89/108/159mm top diameter:15.4mm degree:12

ENQUIRY!

4”DTH HAMMER DHD340/QL40/MISSION40/SD4/COP44/IR40 High Air-pressure

DTH HAMMER

DTH tools is Widely used in open-pit mining, water wells, foundation construction, slope support and other scenes, using pneumatic, through air conduction to the drill pipe, drill pipe conduction to the impactor, the impactor impacts the piston under the action of air, and the piston drives the drill bit, thus achieving the purpose of drilling. Length: 1005mm Weight:40kgs Thread:API 2 3/8” reg Out Diameter:99mm Hole range:110-135mm

ENQUIRY!

5”DTH HAMMER DHD350/QL40/MISSION50/SD5/COP54/IR50 High Air-pressure

DTH HAMMER

DTH tools is widely used in open-pit mining, water wells, foundation construction, slope support and other scenes, using pneumatic, through air conduction to the drill pipe, drill pipe conduction to the impactor, the impactor impacts the piston under the action of air, and the piston drives the drill bit, thus achieving the purpose of drilling. Length: 1100mm Weight:68.5kgs Thread:API 2 3/8” /3 1/2” reg Out Diameter:125mm Hole range:135-155mm

ENQUIRY!

6 3/4″IADC 642 645

TRICONE BIT

Tricone bits are the most widely used drill bits and are suitable for a variety of formations from soft to hard. The tricone bit has low torque when breaking rock, rotates smoothly, and causes little harm to drilling tools and ground equipment: the working edge is longer than that of a scraper bit, which reduces wear and extends the service life. IADC Code:642/645 Bearing Type:Roller-Ball-Roller- Thrust Button/Open Bearing circulation Type:Jet Air PRODUCT SPECIFICATION Cutting Structure:-Inner and Nose Rows:Conical -GageRows:Conical Gage Bevel Protection:Round Pin Connection:31/2"AP Wetric Bit Diameter:171mm Product Weight:20KG

ENQUIRY!

ABOUT US

Guizhou Reeke Rock Tools Co.,Ltd

Reeke was Founded in 2012 products including top hammer ,DTH drilling tools. Since the establishment of Reeke, the company has adhered to the path of professional and refined development.

Series of products have quickly won the market with ts safe and reliable quality and complete after-sales service system obtaining customers all over the world in more than 20 industrial developed countries and areas.

We take " to realize staff's self-worth to satisfy the users, to achieve win-win development" as our mission. Being guided by the innovation of technology and management, we focus on solving industrial problems such as wear resistance, crushing and pressing, striving to build a world-class manufacturer and service provider in the fields of mining and earth work drilling tools, carbide alloys and hard-facing materials.